Welcome to FM Industry

In Focus / Company News, Architecture, EMEA, Americas, APAC

Protecting Historic Buildings in Areas of High Seismic Activity

26 June 2018 / by CINTEC International (author) / New York, Newport
 (photo: )

CINTEC International announces a new type of dissipative wall anchor to solve the issue of how to protect heritage buildings in some of the most earthquake-prone parts of the world.

 

This new product is designed for use with Cintec’s proven wall anchor system.

 

“We believe that this anchor is a major breakthrough in further protecting the world’s iconic buildings, especially in areas of high seismic activity,” said Peter James, Managing Director of Cintec International. “This anchor has been four years in development within the NIKER program. It has undergone extensive testing at Bath University, and in Italy.”

 

The standard Cintec anchor system consists of a stainless steel anchor body encapsulated in a fabric sock. Diamond holes are drilled into the building and each anchor is placed in a hole. A specialized grout in pumped to the far end of the anchor, filling from back to front until the entire sock is inflated like a balloon. After the anchor has been inflated, the walls have been securely strengthened without affecting the outside appearance of the building.

 

For buildings subject to regular earthquake activity, there is a possibility of pull-out damage at the anchorage head. The new anchor solves this problem by allowing for small amounts of movement through a sliding mechanism.

 

The Cintec dissipative anchor consists of a set of stainless steel plates to which four bolts apply pressure, creating friction to an adjustable degree. There are built-in stops to restrict the sliding motion, and connectors that link to Cintec’s standard anchor rods. The anchor allows a controlled and repairable drift for the walls, managing the amount of seismic energy fed into the structure and therefore minimizing damage to the building.

 

The development of this anchor resulted from Cintec’s involvement with the European NIKER project. In 2011, Cintec was chosen as the only British commercial company to actively participate in this project, the aim of which was to protect the artistic value of cultural heritage sites from earthquake-induced damage. Cintec has been working in collaboration with the University of Bath to create and test the dissipative anchor since then, and has now patented the finished product.

 

Cintec anchors have been used to strengthen and restore historically significant structures around the globe, including Egypt’s pyramids, Windsor Castle, and even the White House.

 

 

CINTEC International

Author

CINTEC International

Based in Wales, UK, Cintec™ International Ltd. has been a leader in engineering research and development since 1984. Originally called Cavity Lock Systems, Cintec™ International now provides design and installation of masonry anchoring stabilization systems and explosion blast mitigation protection products and services globally, through: Cintec™ International Ltd in Wales, Cintec™ Canada Ltd in Ottawa, Canada, Cintec™ America Inc. in Baltimore U.S.A., Cintec™ Australasia Pty, Ltd in Newcastle, Australia, and Cintec™ India in Delhi, India. These independent but colobrative engineering design and consulting companies together with partnerships and agents throughout the world, form a unique global presence. Cintec™’s product range includes subdivisions that offer clients turnkey engineering service packages, including design engineering and installation contracting. Visit www.cintec.com for more information.

Article rating:

vote data

Write a Comment

Copyright © 2004-2019 Integrated Identity Limited | All rights reserved